What the LaserLoc 313 Kit Includes
The LaserLoc 313 is a high-power rocket kit from LOC/Precision. It is rated Expert complexity and is designed for full dual deployment. The kit comes with a 54mm motor mount, a ripstop nylon main parachute, a drogue, two starter recovery blankets, full decals, a boat tail, and an electronics bay. The shock cord consists of two lengths of nylon with sewn loops. The fins and rings use material as specified in the instructions, and the kit includes a LOC N FIN ring combo and a slotted booster.
Pre-Build Fit Checks
Before applying any adhesive, perform these fit checks to ensure smooth assembly.
- Check motor mount fit: Verify that your 54mm motor slides freely into the motor mount tube. The kit is designed for a 54mm mount, but slight variations in tubing or motor casings can occur.
- Dry-fit the LOC N FIN ring combo: The LOC N FIN ring combo integrates centering rings and fin alignment. Dry-fit the assembly onto the motor mount tube and inside the airframe to confirm a snug, square fit before gluing.
- Test electronics bay insertion: The kit includes an electronics bay for dual deployment. Insert the bay into the airframe to ensure it slides in and out smoothly and that the switch band or access point aligns with your planned setup.
- Inspect the slotted booster: The slotted booster tube comes pre-slotted for fin alignment. Check that the slots line up with the fin tabs and that there is no debris or rough edges that could interfere with assembly.
LaserLoc 313 at a Glance
- LaserLoc 313: Complexity: Expert; Full Dual Deployment Ready; Diameter: 3.1"; Height: 72.5"; Weight: 3.3 lbs; Motor Mount: 54mm; Parachute: 42" ripstop nylon with 15" drogue. These specs confirm the kit is built for experienced flyers who want a high-performance, dual-deploy rocket capable of breaking the sound barrier.

LaserLoc 313 - LaserLoc 313: Includes electronics bay, slotted booster, LOC N FIN ring combo, and boat tail. These features simplify alignment and reduce the need for aftermarket parts, making the build more straightforward for an expert-level kit.
- LaserLoc 313: Recommended motor retention: 54mm LOC Pro Motor Retainer (sold separately). Using the recommended retainer ensures secure motor hold-down and prevents the motor from ejecting during flight.
Assembly Tips for the LaserLoc 313
The LaserLoc 313 has been in production for 35 years and is known for breaking the sound barrier. The kit uses a 54mm motor mount, so plan your motor selection accordingly. The included electronics bay makes dual deployment straightforward, but you will need to supply your own altimeter and ejection charges. The ripstop nylon main parachute and drogue are included, so you won't need to purchase separate recovery hardware. The LOC N FIN ring combo helps align fins and centering rings simultaneously, which saves time and reduces error. Follow the included instructions carefully, and dry-fit every joint before applying epoxy.
Motor and Recovery Planning
With a 54mm motor mount and a 3.3-pound empty weight, the LaserLoc 313 can handle a wide range of high-power motors. The kit is dual-deploy ready, so you can fly it on motors that require electronic deployment. The included main parachute is appropriate for the weight and diameter, but always verify recovery sizing against your expected descent speed. The drogue is used for apogee deployment. The two starter recovery blankets protect the parachutes from heat. Plan your motor retention: a 54mm LOC Pro Motor Retainer is recommended by the manufacturer.


