What the 1.63" Magnum Kit Includes
The 1.63" Magnum is a Park Flyer kit designed for quick assembly and versatile flying—suitable for ball diamonds, large fields, and spaces in between. The kit includes laser-cut fins with pre-cut slots, a recovery system with elastic cord, parachute, and fire-resistant blanket, plus instructions and vinyl decals.
Key Specifications
- 1.63" Magnum: Includes a payload bay, 29mm motor mount and can be assembled in minutes! The 29mm motor mount opens up a range of mid-power motors, while the payload bay allows carrying altimeters or small cameras. Quick assembly means less time building and more time flying.

1.63" Magnum
Build Checkpoints
The following steps are based on the kit's supplied features. Always refer to the included instructions for exact procedures.
- Laser-Cut Fins and Slots: The kit includes laser-cut fins and matching fin slots. Dry-fit the fins before applying glue to ensure a snug fit with minimal sanding.
- Motor Mount Installation: The 29mm motor mount is pre-sized for the airframe. Use a slow-curing epoxy to secure the mount, ensuring it is centered and aligned with the thrust line.
- Payload Bay Preparation: The payload bay is included for adding electronics or extra mass. Check that the bay tube fits smoothly into the airframe and that the nose cone seats properly.
- Recovery System Assembly: Attach the elastic cord to the nose cone and airframe, then pack the parachute and fire-resistant blanket according to the instructions. Avoid over-tightening the blanket.
- Decal Application: Vinyl decals are included. Clean the surface with mild soap and water, then apply decals using a squeegee to avoid bubbles. Let them set as directed in the product instructions before flight.
Motor Selection and Flight Planning
With a 29mm motor mount, the Magnum can use a variety of 29mm motors. Choose a motor that matches your field size and experience level—lower impulse motors for smaller fields, higher for larger spaces. The payload bay also allows adding an altimeter for altitude tracking. Always follow the manufacturer's motor recommendations and local regulations.


