What the LaserLoc 223 Kit Includes
The LaserLoc 223 is a 2.2" diameter minimum diameter mid-high power rocket kit from LOC/Precision, celebrating 35 years of the LaserLOC series. It comes with a 54mm minimum diameter motor mount (a 38mm adapter is included), precut 4 oz fiberglass cloth, a 28" ripstop nylon parachute with a 15" drogue, and a full dual deployment electronics bay. The kit also includes 1/4" launch lugs, 2x TN-316-15 recovery blankets, and full decals.
This is an Expert-level kit, meaning it requires fiberglassing and a solid understanding of mid-power rocketry. If you're new to fiberglass, the kit gives you a chance to learn. The instructions and Rocksim file are included.
Motor Mount and Fin Installation
The motor mount is minimum diameter, meaning the motor tube forms the airframe. The kit includes a 38mm motor tube adapter (MMA-4) and two centering rings. The fin slots are laser etched for easier glassine removal, and the multi-slot airframe lets the fins click into the booster.
- Prepare the motor mount: Insert the 38mm adapter into the 54mm tube if you plan to fly with 38mm motors. The centering rings will be glued to the motor tube; use long-cure epoxy for best results.
- Fit the fins: The fins are 1/8" thick and click into the pre-cut slots. Before gluing, dry-fit to ensure alignment. The slots are laser etched for easy glassine removal, which helps the epoxy bond.
- Apply fiberglass: The kit includes precut 4 oz fiberglass cloth. Apply it with long-cure epoxy from fin to airframe, then fin to fin. Use one light coat and two moderate coats – do not overcoat. This reinforcement gives the rocket strength for higher impulse motors.
Recovery System Setup (Dual Deployment)
The LaserLoc 223 is full dual deployment ready, meaning it can separate at apogee and at a lower altitude for main deployment. The kit includes an electronics bay and two recovery blankets.
- Install the electronics bay: The bay is included and fits the 2.2" airframe. Mount your altimeter (e.g., EasyMini or similar) and connect the ejection charges. Follow your altimeter's manual for wiring and calibration.
- Attach the shock cords: Two 15' 3/16" tubular nylon shock cords with sewn loops are provided. Attach one to the drogue parachute and one to the main parachute. The snuffer tube mount holds the shock cord and protects it from ejection heat.
- Pack the parachutes: The 28" ripstop nylon main parachute and 15" drogue are included. Pack the drogue tightly in the booster section and the main in the payload section. Use the recovery blankets to protect the parachutes from ejection gases.
Finishing and Painting Tips
After fiberglassing and sanding, apply 2-3 coats of high-build primer, sanding with 400 grit until the spirals are filled. Then paint as desired. The kit's OEM colors are achieved with Createx paints: 6002 Sealer Black, 4258 Gloss Black, 4004 Quick Silver, and a mix of 4030/4657 Balancing Clear and Caribe Blue. Lightly sand with 1000 grit before applying decals, then clear coat after decals are placed.
For best results, follow the manufacturer's recommendations for paint application. The full decal sheet is included.
First Launch Checklist
Before your first flight, verify the following: motor retention (use the 38mm adapter or a 54mm motor), ejection charge sizes for dual deployment, and altimeter settings. The kit is strong enough for supersonic flights and can fly on an F motor, but ensure your launch site is large enough for the expected altitude. Use 1/4" launch lugs or fly-away rail guides. Bring extra recovery blankets and a backup altimeter if possible.
The LaserLoc 223 is designed for experienced builders. Take your time with the fiberglassing and dual deployment setup, and you'll have a reliable, high-performance rocket.
Key Specifications from the Kit
- LaserLoc 223: Height: 58.5", Weight: 28 oz., Motor Mount: 54mm minimum diameter with 38mm adapter included These dimensions determine which motors fit and what launch rail you need. The 54mm mount allows for high-impulse motors, while the 38mm adapter lets you fly common mid-power motors.

LaserLoc 223 - LaserLoc 223: Parachute Size: 28" Ripstop Nylon with 15" Drogue The dual parachute system is essential for safe recovery. The drogue deploys at apogee, and the main at a lower altitude to reduce drift.
- LaserLoc 223: Full Dual Deployment Ready with electronics bay and recovery included You don't need to buy separate electronics bays or recovery hardware – the kit is complete for dual deployment, saving you time and cost.


