Back to Blog
How-to Guides 2026-11-20 High Power Model Rocketry 0 views

Decal Set 765 V2: Application and Design Guide

Decal Set 765 V2: Application and Design Guide

Learn how to apply the Decal Set 765 V2 vinyl decals to your rocket. This guide covers prep, application steps, and what the catalog confirms about the decals.

What the Decal Set 765 V2 Includes

The Decal Set 765 V2 from Loc Precision includes professionally manufactured vinyl decals designed for rocket finishing. According to the catalog, these decals are printed in-house using advanced print head technology with integrated print/cut capabilities. The graphics use environmentally safer ECOSOL inks in CMYK mode, producing a gloss finish with excellent white point and high color saturation.

The decals are made from premium cast vinyl with an advanced adhesive technology that allows for permanent graphic installation. The vinyl is super conformable, which helps it adhere to curved rocket surfaces without lifting. The set is available at about half the price typically quoted from vinyl print shops, making it a cost-effective option for detailed rocket graphics.

Application Steps for a Smooth Finish

Follow these steps to apply the Decal Set 765 V2 decals to your rocket. The supplied catalog does not include detailed application instructions, so these are general best practices for vinyl decal application.

  1. Prepare the surface: Clean the rocket body tube thoroughly. Remove any dust, grease, or release agents from the surface. A clean surface helps the permanent adhesive bond properly.
  2. Position the decal: Peel the backing from the vinyl decal and position it on the rocket. The super conformable vinyl allows you to adjust slightly before pressing down. Work from the center outward to avoid air bubbles.
  3. Burnish the decal: Use a soft cloth or squeegee to press the decal firmly onto the surface. Pay extra attention to edges and curves. The advanced adhesive technology creates a permanent bond once applied.
  4. Finish and protect: After application, inspect for any lifted edges. The gloss finish and high-impact graphics should look clean and vibrant. No additional clear coat is required, but you may apply one if desired for extra protection.

What the Catalog Confirms About the Decal Set 765 V2

  • Decal Set 765 V2: The decals are printed on premium cast vinyl with advanced adhesive technology for permanent graphic installation. This confirms the decals are designed for long-term adhesion and can handle the stresses of flight and handling.
    Decal Set 765 V2
    Decal Set 765 V2
  • Decal Set 765 V2: The graphics have a gloss finish and excellent white point, with high impact and saturation from ECOSOL inks. The finish and color quality mean your rocket will have professional-looking graphics that stand out on the field.
  • Decal Set 765 V2: The decals are available at about half the price quoted from vinyl print shops. This makes the Decal Set 765 V2 a budget-friendly option for custom rocket graphics without sacrificing quality.

Tips for Avoiding Common Issues

When applying the Decal Set 765 V2, work in a clean, dust-free environment. Dust particles trapped under the decal can create bumps that affect adhesion. If you need to reposition a decal, lift it gently while the adhesive is still fresh. The permanent adhesive becomes harder to remove once fully set.

For curved surfaces like nose cones or transition sections, the super conformable vinyl helps the decal follow the shape without creasing. Apply heat from a hair dryer on low setting to soften the vinyl slightly for tight curves. Avoid stretching the decal too much, as this can distort the design.

The catalog does not specify a curing time for the adhesive, but allowing the decal to sit undisturbed for several hours after application helps ensure a strong bond. Do not fly the rocket immediately after applying decals; give the adhesive time to reach full strength.

Related Articles

Customer Service
Home
Products
Cart
Profile