What the PML Bull Puppy 2.2" Decal Set Includes
The Decal Set PML Bull Puppy 2.2" provides the markings needed to complete the look of your rocket model. This set is designed specifically for the 2.2" PML Bull Puppy, a Public Missiles product, and includes decals for the Bull Puppy model. The decals are categorized as accessories and decals, meaning they are intended to be applied after the rocket body is painted and finished.
Decal Set Details
- Decal Set PML Bull Puppy 2.2": Compatible with the 2.2" PML Bull Puppy. Brand: Public Missiles. Category: Accessories and decals. Includes decals for the Bull Puppy model. Ensures you have the correct decals for your specific rocket model, preventing fit issues during application.

Decal Set PML Bull Puppy 2.2"
Preparing the Rocket Surface
Before applying any decals, the rocket body must be clean, dry, and free of dust, oil, or fingerprints. If you have painted the rocket, allow the paint to fully cure according to the paint manufacturer's instructions. A smooth, glossy surface provides the best adhesion. Lightly sanding with fine-grit sandpaper and wiping with a tack cloth can help remove any imperfections.
Applying the Decals
Follow these general steps for applying water-slide decals, which are typical for model rocketry. Adjust based on the specific type of decal provided.
- Cut out the decal: Use sharp scissors or a hobby knife to cut closely around each decal, leaving a small clear border.
- Soak in warm water: Dip the decal in warm water for a few seconds until it starts to slide off the backing paper. Do not oversoak.
- Position on the rocket: Slide the decal onto the rocket surface using a wet finger or tweezers. Adjust position while the decal is still wet.
- Remove air bubbles and excess water: Gently squeeze out water and air bubbles using a soft squeegee or a damp cloth, working from the center outward.
- Let dry completely: Allow the decal to dry undisturbed. Drying time depends on humidity and temperature.
Sealing and Protecting the Decals
Once the decals are fully dry, apply a clear topcoat (such as a spray acrylic or polyurethane) to seal them and protect against handling and weather. Multiple light coats are better than one heavy coat. This step also helps blend the decal edges into the paint for a more professional finish.
What the Catalog Does Not Confirm
The supplied product information does not include specific instructions for application temperature, soak time, or recommended clear coat products. For best results, test on a scrap surface first and follow the decal manufacturer's guidelines if available. Always work in a well-ventilated area when using adhesives or sealants.


