Back to Blog
How-to Guides 2026-11-12 High Power Model Rocketry 6 views

Setting Up the Altus Metrum 400mAh LiPo Battery

Setting Up the Altus Metrum 400mAh LiPo Battery

Learn how to set up the Altus Metrum 400mAh LiPo battery for your rocket altimeter. Key specs, connection tips, and safety warnings included.

What the Altus Metrum 400mAh LiPo Battery Is For

The Altus Metrum 400mAh LiPo battery is a compact power source designed specifically for Altus Metrum flight computers. Its slim size and low weight make it a natural fit for rockets where space and mass are tight. Before you connect it, it helps to understand what this battery is (and what it isn't).

Key Specifications at a Glance

  • Altus Metrum 400mAh LiPo Battery: Each cell outputs a nominal 3.7V at 400mAh. This voltage and capacity match the requirements of Altus Metrum flight computers, so you can power your altimeter reliably without over- or under-powering it.
    Altus Metrum 400mAh LiPo Battery
    Altus Metrum 400mAh LiPo Battery
  • Altus Metrum 400mAh LiPo Battery: These batteries are approximately 0.2x1.0x1.4" (5.5x25x35mm), and weigh about 9.5g (0.33oz). The small footprint lets you tuck the battery into tight avionics bays or alongside other components without adding noticeable weight.
  • Altus Metrum 400mAh LiPo Battery: Comes terminated with a standard 2-pin JST connector - 2mm spacing between pins, that plugs directly into the battery connector on Altus Metrum flight computers. No adapter or soldering is needed — the connector matches the flight computer's port, so you can plug in and go.

Connecting the Battery to Your Flight Computer

The battery's JST connector fits directly into the matching port on Altus Metrum flight computers. Align the connector so the pins match the receptacle — the 2mm pin spacing prevents accidental misconnection. Push gently until fully seated. Do not force it; if it doesn't slide in, check alignment.

Because this battery lacks an over-current protection circuit board, make sure your flight computer is powered off before connecting. This avoids any risk of a sudden current draw that could damage the battery or the device.

Charging the Battery Safely

Use the Altus Metrum 400mAh LiPo Battery Charger (sold separately) to recharge. Do not attempt to charge with a generic LiPo charger unless it supports the specific chemistry and capacity. Always charge in a fire-safe location and never leave a charging battery unattended.

Critical Safety Warnings

WARNING: Unlike most LiPo batteries made for hobby use, these batteries are made specifically for use with Altus Metrum flight computers and do not contain an over-current protection circuit board. That means the battery will not shut off automatically if something goes wrong. Always inspect the battery for swelling, damage, or loose connectors before each use. If you see any sign of damage, do not use or charge the battery.

Also note: this battery cannot be shipped outside the USA, and cannot be shipped via 2nd Day Air or Next Day Air. Plan your purchase accordingly.

Related Articles

Customer Service
Home
Products
Cart
Profile