FS-Vulcanite

Replaced a cracked fin on my Vulcanite and the fit was dead-on, no sanding needed. The balsa is stiffer than the stock set, which should help on harder landings.

Swapped these onto my Vulcanite after a hard landing cracked an original fin, and the replacement lined right up with the existing slots. The beveled edges are clean and consistent across all three, so it flies just as straight as it did before.

These fins fit the Vulcanite body tube perfectly with no sanding needed, and the edges came clean and uniform right out of the package. Flights are noticeably straighter than with the stock set.