High Power Model Rocketry

LaserLoc 223

LaserLoc 223 - Main image
$79.1 $123.59 In stock

LOC創立35周年を記念して、昔ながらの名作が復活!LaserLOCシリーズは、一般向けとして初めて生産された最小直径ミッドハイパワーキットのひとつです。伝統を受け継ぎつつ、現代風の改良を加え、あなたのスキルを試します。スロット周りのレーザーエッチングにより、グラシンの剥離が簡単になりました。マルチスロットの機体により、フィンをブースターにクリックで取り付け可能。プリカットされた4オンスのグラスクロスは、フィンから機体、フィンへと簡単にエポキシ接着できます。この補強により、今日の高インパルスモーターにも耐えうる強度をLaserLOCに与えます。グラスクロスは、硬化時間の長いエポキシで接着するのが最適です。グラス張りが初めての方にも、これがチャンスです!1/4インチの発射ラグ付属。フライアウェイレールガイドも別の選択肢です。完全な二段展開対応で、エレクトロニクスベイとリカバリーシステムも含まれています。さあ、グラス張りの友達とドラッグレースを楽しみましょう!!! – we bring back an old favorite! The LaserLOC series was one of the first production minimum diameter MID-HIGH POWER kits available to the public. Keeping the tradition going we have a few modern day tweaks that will put your skills to the test. A gentle laser etch around the slots allow for easier glassine removal. Multi-slot airframe allow the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today’s higher impulse motors. Fiberglass should be applied with a long cure epoxy for best results. If you have never glassed anything before, here’s your chance! 1/4″ Launch lugs included. Fly away rail guides are another alternative. Full dual deployment ready with electronics bay and recovery included. Go ahead, drag race your fiberglass friends!!!

超音速飛行にも耐える強度。そして、お財布にも優しく、Fモーターでも飛ばせる軽さ!

仕上げ

ハイビルドプライマーを2〜3回塗布します。スパイラルが埋まるまで400番のサンドペーパーで研磨します。お好みで塗装するか、以下の手順に従ってください。

Createxペイント。メーカーの推奨する塗布方法に従ってください。

OEMカラーを再現するために、以下のペイントとその比率を使用しました。

6002            シーラーブラック
4258            グロスブラック
4004            クイックシルバー。薄く1回、中程度に2回塗り(塗りすぎに注意!)
4030/4657        3:1 バランシングクリアとカリビアンブルー(希望する濃度になるまで)

デカールを貼る前に、1000番のサンドペーパーで軽く研磨し、オーバースプレーを落とします。デカール貼付後、お好みでクリアを塗ってください。

説明

LaserLOC223 説明書

LaserLOC223 Rocksim

難易度: エキスパート
完全な二段展開対応
直径: 2.2インチ
全長: 58.5インチ
重量: 28オンス
モーターマウント: 54mm最小直径 - MMA-4 38mm付属
パラシュートサイズ: 28インチ リップストップナイロン、15インチドローグ付き
ショックコードタイプ: 2x TN-316-15 15フィート 3/16インチ チューブラーナイロン、縫い付けループ付き
ショックコードマウント: スナッファーチューブ - 38mmモーターチューブ + 2つのセンタリングリング
フィン厚: 1/8インチ
リング厚: 最小直径
スターターリカバリーブランケット x2
フルデカール
説明書: あり

VANDERBURNのToby VanderbeekがLaser LOCをレビューしているビデオをご覧ください。

お支払い前の確認

利用可能な支払方法と最終金額は購入手続きで表示されます。

発送までの時間

注文の処理時間と配送時間の両方を見込んでください。

Standard Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

Express Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

規定を見る
返金が必要なとき

返金については注文番号を添えて店舗にお問い合わせください。

返送前に返金処理期間をご確認ください。

規定を見る
配送料金

お届け先と選択した配送方法の料金をご確認ください。

Standard Shipping · アメリカ合衆国: $0.00

Express Shipping · アメリカ合衆国: $3.99

規定を見る
返品前の確認

返送する前に適用される返品条件をご確認ください。

アメリカ合衆国 · 返品期限(受取後の日数): 30. 返品方法: 郵送. 返品送料: 販売者負担.

規定を見る

Customer Reviews (5.0 / 5 · 5 reviews)

Ryan O. ★★★★★

This minimum diameter build is exactly what I wanted for mid-high power reloads, and the laser-cut fins fit together with almost no sanding. Mine's been up four times on G motors and the nose cone still seats perfectly.

James ★★★★★

Been flying mid-power rockets for years and this kit’s minimum diameter design is exactly what I wanted—it’s a clean, classic build that still feels modern. Took me a couple evenings to finish, and the first flight went straight up with zero issues. Glad they brought this one back for the 35th anniv

Isabella ★★★★★

Assembled this one over a weekend and the minimum diameter design is exactly as advertised—sleek, but with enough room to fit my electronics without a struggle. Flies straight off the pad and the 35-year heritage really shows in the build quality. First mid-power kit I’ve done and it’s given me the