Why Phenolic Tubing for Your Motor Mount?
When you're building a high power rocket, the motor mount is the backbone of the airframe. It transfers thrust, absorbs vibration, and keeps your motor centered during flight. Phenolic tubing is a popular choice because it offers a good balance of rigidity and weight for mid- and high-power builds.
This guide focuses on the Phenolic Motor Mount Tubing available at High Power Model Rocketry. We'll walk through the available sizes, what they weigh, and how to choose the right one for your project. We'll also be honest about what the catalog doesn't tell you, so you can make an informed decision.
Phenolic Motor Mount Tubing Options
- Phenolic Motor Mount Tubing: Available in three inside diameters: 1.145" ID, 1.525" ID, and 2.152" ID, each in an 18" length. The inside diameter determines which motor casing or adapter will fit. Choose the size that matches your motor tube or the inner diameter of your airframe.

Phenolic Motor Mount Tubing - Phenolic Motor Mount Tubing: Weights: 2.3 oz for the 1.145" ID, 3.1 oz for the 1.525" ID, and 4.4 oz for the 2.152" ID. Weight affects your rocket's overall mass and stability. Heavier tubing adds strength but may require a larger motor or more nose weight to maintain proper stability.
How to Choose the Right Diameter
The first step is to know the outside diameter of your motor casing or the inner diameter of your airframe. The tubing's inside diameter (ID) must be slightly larger than the motor casing so it slides in without binding. If you're using an adapter, check its dimensions as well.
For smaller high power motors, the 1.145" ID is often a good fit. For larger motors or when you need room for a motor retainer, the 1.525" ID or 2.152" ID may be more appropriate. Always measure your components before ordering—don't guess.
What the Catalog Doesn't Tell You
- Wall thickness: The catalog lists only inside diameters and weights. It doesn't specify the wall thickness, which affects strength and fit. You'll need to measure the outside diameter or consult the manufacturer for exact dimensions.
- Compatibility: The catalog doesn't list which motor brands or airframe kits this tubing fits. You'll need to verify that the ID matches your motor mount tube or that the outer diameter aligns with your airframe's inner diameter.
- Cutting and finishing: Phenolic tubing is typically cut with a fine-tooth saw or a tubing cutter, but the catalog doesn't provide specific instructions. Take care to deburr the edges after cutting to avoid damaging your motor or airframe.
Strength vs. Weight: Making the Tradeoff
Phenolic tubing is known for its rigidity and heat resistance, making it a solid choice for motor mounts. However, strength comes with weight. The 2.152" ID tubing weighs 4.4 oz for an 18" length, which is nearly twice the weight of the 1.145" ID option. Consider your rocket's total weight and the thrust-to-weight ratio when selecting a size.
For most mid-power builds, the 1.145" ID offers a good balance. For larger high power rockets, the heavier options provide more material for mounting fins or anchoring the motor retainer. There's no single 'best'—it depends on your specific build and motor choice.
Practical Tips for Your Build
- Measure twice, order once: Before ordering, measure the inside diameter of your airframe and the outside diameter of your motor casing. The tubing's ID must be larger than the motor casing, but the tubing's OD must fit inside your airframe.
- Consider the length: Each tubing is 18" long. You may need to cut it to fit your specific motor mount. Plan your cuts carefully to avoid wasting material.
- Think about future upgrades: If you plan to fly larger motors later, choose a tubing size that accommodates an adapter or a larger motor casing. This can save you from rebuilding the motor mount.


