Back to Blog
How-to Guides 2026-11-20 High Power Model Rocketry 0 views

Applying the Decal Set Bruiser EXP Step by Step

Applying the Decal Set Bruiser EXP Step by Step

A practical guide to applying the Decal Set Bruiser EXP vinyl decals on your high-power rocket, with tips on surface prep and placement.

What the Decal Set Bruiser EXP Includes

The Decal Set Bruiser EXP is a vinyl decal set designed to give your rocket a professional, high-impact look. The decals are printed in-house using advanced print/cut technology and ECOSOL inks, which produce vivid, saturated colors with a gloss finish and excellent white point. The vinyl itself is a premium cast material with an advanced adhesive that allows for permanent, conformable installation.

Decal Set Bruiser EXP Details

  • Decal Set Bruiser EXP: Professionally manufactured in-house using the industry’s most advanced print head technology, integrated print/cut capabilities, superior media handling and print speed. This means the decals arrive pre-cut and ready to apply, saving you time and effort compared to cutting out individual decals by hand.
    Decal Set Bruiser EXP
    Decal Set Bruiser EXP
  • Decal Set Bruiser EXP: Uses environmentally safer ECOSOL inks in CMYK mode which add impact to our graphics for attention-grabbing results. The ECOSOL inks produce vibrant colors that stand out on the launch pad and in the air, while being more environmentally friendly than solvent-based inks.
  • Decal Set Bruiser EXP: Premium cast vinyl with advanced adhesive technology, allowing permanent graphic installation. The cast vinyl conforms to curves and contours on your rocket body, ensuring the decal stays in place without lifting over time.

Application Steps for a Smooth Finish

Applying vinyl decals requires patience and a clean work surface. The following steps will help you achieve a bubble-free, long-lasting result.

  1. Prepare the surface: Ensure the rocket body is clean, dry, and free of dust, grease, or release agents. A mild soap-and-water wipe followed by a dry cloth works well. Avoid applying decals over fresh paint that has not fully cured.
  2. Position the decal dry: Before removing the backing, place the decal on the rocket to confirm placement. Use low-tack painter's tape to hold it in place temporarily. This step helps you avoid repositioning once the adhesive is exposed.
  3. Apply the decal wet or dry: For large or complex decals, a wet application (using a spray bottle with a few drops of dish soap and water) allows you to slide the decal into position. For smaller decals, dry application is fine. Either way, work from the center outward to push out air bubbles.
  4. Burnish and set the adhesive: Use a squeegee or a soft cloth to press the decal firmly onto the surface, removing any trapped air or water. Pay extra attention to edges and raised details. The advanced adhesive technology ensures a strong bond once fully set.
  5. Allow the decal to cure: After application, let the decal set undisturbed for the adhesive to reach full strength. Avoid handling the decal or exposing the rocket to moisture or extreme temperatures during this time.

Tips for Avoiding Common Issues

Bubbles and wrinkles are the most common problems when applying vinyl decals. To minimize them, apply the decal slowly and use a squeegee to push out air as you go. If a bubble persists, you can prick it with a pin and smooth the area. For wrinkles, heat the decal gently with a hairdryer on low heat to soften the vinyl, then smooth it out. The cast vinyl's conformability helps it settle into contours without creasing.

Related Articles

Customer Service
Home
Products
Cart
Profile